Test Light Instructions - Petsafe LITTLE DOG Remote Trainer Operating And Training Manual

Test Light Instructions

1. Hold the Test Light Contacts to the
Contact Points.
2. Press the Lower Button
(Stimulation) on the Remote
Transmitter.
3. The Test Light will flash. Note: At
higher Intensity Levels, the Test Light
will flash brighter.
Save the test light for future testing.
Note: If the Test Light does not fl ash, install a new battery and re-test. If Test Light still
does not fl ash, contact the Customer Care Center at 1-800-732-2677.
48
Test Light
Contacts
1-800-732-2677