Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Petsafe Add-a-dog PAC00-12893
Summary of Contents for Petsafe Add-a-dog PAC00-12893
- Page 1 Remote Trainers with Vibration operating and training guide remote trainer remote trainer with with Vibration Vibration Plus Pdt00-12892 Pdt00-12894 add-a-dog Collar add-a-dog Collar ® ® with Vibration with Vibration Plus PaC00-12893 PaC00-12914 Please read this entire guide before beginning...
- Page 2 If you are unsure whether this product is appropriate for your dog, please consult your veterinarian or certified trainer. The PetSafe Remote Trainer is not a toy. Keep away from the reach of ®...
-
Page 3: Table Of Contents
To get the most protection out of your warranty, please register your product within 30 days at www.petsafe.net. By registering and keeping your receipt, you will enjoy the product’s full warranty and should you ever need to call the Customer Care Center, we will be able to help you faster. -
Page 4: Components
Charging Adapter How the System Works Now you can experience the difference a Remote Trainer can make. Spend less time training and more time enjoying your dog. These PetSafe Remote Trainers are comfortable for your pet and ® easy to use with our unique adjustable vibration. A great method of communicating with your dog and capable of teaching all the customary commands. -
Page 5: Key Definitions
Red or Green LED will flash (depending on Dog 1 or Dog 2 mode), indicating it is in safety time-out mode. The button will need to be released and pressed again before additional Stimulation can be delivered. www.petsafe.net... - Page 6 Receiver Collar: Receives the radio Charging Jack signal from the Handheld Transmitter. It Contact Points (with cover) is waterproof. On/Off Button: Momentarily pressing and holding this button turns the Receiver Collar Collar Strap on and off. Retainers Contact Points: The contacts through which the Receiver Collar delivers the Vibration Correction and/or the Static Stimulation.
-
Page 7: Operating Guide
Green LED Normal Operation Dog 2—any blue correction button ON length of any blue correction button press. If a Static Stimulation button is held up to 12 continuous seconds, then a rapid flash will indicate a safety time-out. Charging Complete www.petsafe.net... -
Page 8: Prepare The Receiver Collar
Prepare the Receiver Collar Step Charge the Receiver Collar 1. Lift the rubber dust cover protecting the Receiver Collar Charging Jack. 2. Connect one of the charger connectors to the Receiver Collar Charging Jack (2A). 3. Plug the charger into a standard wall outlet. The Red LED will light up. -
Page 9: Fit The Receiver Collar
Contact Points too tightly against your pets neck. You may put a separate non-metallic collar on your dog’s neck and attach a leash. Do use a harness for attaching a leash and/or tags while using the Remote Trainer. Please refer to page 2 for additional information. www.petsafe.net... -
Page 10: Pairing The Receiver Collar For One Dog Operation
ID. Pairing the Receiver Collar for Two Step Dog Operation For a 2 Dog System, additional Receiver Collars are available at www.petsafe.net or through our Customer Care Center. Adding Dog 2 Remote Transmitter 1. Set the Level Select Switch to 2. -
Page 11: Accessories
(The Red LED will blink 3 times when it is complete.) Accessories To purchase additional accessories for your PetSafe Remote Trainer, contact the ® Customer Care Center at 1-800-732-2677 or visit our website at www.petsafe.net to locate a retailer near you. www.petsafe.net... -
Page 12: Training Guide
Training Guide Testing the Remote Trainer We recommend you experience first-hand how the PetSafe Remote Trainers with Vibration function. ® Always begin at the lowest level and increase the intensity up to your personal comfort level. 1. Place your fingers on both Contact Points of the Receiver Collar. -
Page 13: General Tips
Do not shave the pet’s neck as this may increase the risk of skin irritation. If after completing all of these steps your dog still does not indicate he is feeling the Vibration or Static Stimulation, please contact the Customer Care Center or visit our website at www.petsafe.net. General Tips... -
Page 14: Teaching Basic Obedience
Vibration or the Static Stimulation. See Find the Best Vibration or Static Stimulation Level for Your Pet on page 12. 4. “Good Dog” in the Home or Outside: Stopping unwanted behavior is easy using the PetSafe ®... - Page 15 13. If your pet now comes to you reliably with the spoken “Come” command, he may now be ready to respond without Static Stimulation. Take a play break and then go back and repeat from Step 3 with Vibration only. www.petsafe.net...
-
Page 16: Eliminating Unwanted Behavior
The “Stay” Command 1. Put a separate, non-metallic collar on your pet’s neck ABOVE the Receiver Collar, and attach a long leash. Note: Be sure the extra collar does not put pressure on the Contact Points. 2. Visibly identify where you want your pet to sit by placing his bed or a large piece of cloth on the ground. - Page 17 Static Stimulation followed by controlled Static Stimulation. Release the button immediately when he stops digging. Note: If a Static Stimulation button is held up to 12 continuous seconds, the LED will flash rapidly to indicate a safety time-out. Once released, the button resets to normal functionality. www.petsafe.net...
- Page 18 5. If your pet ignores the Vibration or Static Stimulation, use a higher level of Stimulation. 6. Continue to watch your pet, as he may choose another area to dig. 7. Do not allow your pet in the yard unsupervised until he has completely stopped digging. Chasing Chasing is an instinctive behavior stimulated by moving objects.
-
Page 19: Excessive Barking
5. If your dog ignores the Vibration or Static Stimulation and continues to bark, repeat the process using a higher level of Stimulation. 6. Practice this exercise in different areas using different situations that would cause your dog to bark. www.petsafe.net... -
Page 20: Frequently Asked Questions
Remote • Yes. A second dog can be added to the system. The ® Trainer with Vibration with additional collar can be purchased at www.petsafe.net or more than one pet? through our Customer Care Center. Will I get exactly ½ mile • The range you get with your PetSafe... -
Page 21: Troubleshooting
Troubleshooting The answers to these questions should help you solve any problem you have with this system. If they do not, please contact the Customer Care Center or visit our website at www.petsafe.net. My pet is not responding • Check to see if the Receiver Collar has been turned on. -
Page 22: Terms Of Use And Limitation Of Liability
8 lbs. or under 6 months old, or if your pet is aggressive. If you are unsure whether this is appropriate for your pet, please consult your veterinarian, certified trainer or contact our Customer Care Center or visit our website at www.petsafe.net. Proper use includes reviewing the entire Operating and Training Guide provided with your product and any specific Caution statements. -
Page 23: Customer Care International
Monday - Friday 10:30 PM - 7 PM This product has the benefit of a limited manufacturer’s warranty. Details of the warranty applicable to this product and its terms can be found at www.petsafe.net and/or are available by sending a stamped addressed envelope to PetSafe Ltd. - Page 24 Radio Systems Corporation ® 10427 PetSafe Way Knoxville, TN 37932 1-800-732-2677 www.petsafe.net 400-1247/3 ©2010 Radio Systems Corporation...
Need help?
Do you have a question about the Add-a-dog PAC00-12893 and is the answer not in the manual?
Questions and answers