Operating Guide Prepare The Remote Transmitter - Petsafe LITTLE DOG Remote Trainer Operating And Training Manual

Prepare the Remote Transmitter
Charge the Remote Transmitter
1. Lift the rubber cover protecting the Remote
Transmitter Charging Jack.
2. Connect the charger connector to the Remote
Transmitter Charging Jack.
3. Plug the charger into a standard wall outlet.
4. Charge the Remote Transmitter for 24 hours for the
first charge. Recharges take only 12 hours.
Note: The Transmitter Indicator Light will flash after 12
hours of charging. For the first charge, continue to charge
the Remote Transmitter for an additional 12 hours.
Operating Guide
www.petsafe.net
Charger connector placed
in the Remote Transmitter
Charging Jack
9