To Pair The Remote Transmitter And Receiver Collar - Petsafe LITTLE DOG Remote Trainer Operating And Training Manual

To Pair the Remote Transmitter and Receiver Collar

If your Receiver Collar does not beep when the Upper or Side
Button of the Remote Transmitter is pressed, or if you feel the
Receiver Collar is not responding to the Remote Transmitter:
1. With the Receiver Collar off your pet, turn the Receiver
Collar on.
2. Turn the Intensity Level Dial on the Remote Transmitter to
"1".
3. Separate the Remote Transmitter and the Receiver Collar
by 2 feet.
4. Press both the upper and lower buttons on the Remote
Transmitter at the same time and hold for ten seconds.
5. The Receiver Collar should emit two beeps.
6. If the Receiver Collar does not beep twice, please contact
the Customer Care Center at 1-800-732-2677.
www.petsafe.net 47