Petsafe LITTLE DOG Remote Trainer Operating And Training Manual page 31

The "Stay" Command
1. Put a separate, non-metallic collar on your pet's neck ABOVE
the Receiver Collar, and attach a 10-foot leash. Note: Be sure the
extra collar does not put pressure on the Contact Points.
2. Put your pet on his bed. Hold your leash in one hand and the
Remote Transmitter in the other.
3. Staying within 3 feet, walk the perimeter of the bed. Do not say
anything to your pet.
4. If your pet tries to leave the bed, press and hold the Lower
Button (Stimulation) and give the "Stay" command. Continue
to hold the button until your pet is back on his bed. If necessary,
use the leash to guide your pet onto his place.
www.petsafe.net 31