Table of Contents
Advertisement
PXES4P Switches
Metal Mounting clips for panel mounting : included
DIN-Rail mounting option: Model :#PXESDINRL
Rack-mount option: #PXESTRAY
Mean Tine Between Failure (MTBF
Agency Approvals and Standard Compliance:
UL Listed (UL 60950), cUL, CE, Emissions meet FCC Part 15, Class A.
NEBS L3 and ETSI compliant
IEEE P1613 Env. Std for Electric Power Substations
IEC61850 EMC and Operating Conditions Class C for Power Substations
Designed for above-the-ceiling (plenum) installation
PXES4P Switches
1.2 Summary of model and descriptions:
PXES4P-Hd, Hi = Hardened, four 10/100 RJ-45 ports Switch, Factory floor, Int. 8-15VDC,
Ext. AC Hardened power supply included .
PXES4P-12VDC = Same as PXES4P model, except Ext. AC Hardened power supply not included
PXES4P24C = Same as PXES4P-12VDC model, except for 24VDC power input
PXES4PR-24VDC = Same as PXES4P-24VDC model, but includes PXESDINRL option.
PXES4P-48VDC = Same as PXES4P-24VDC model, except for -48VDC power input.
PXESTRAY = 19" Rack-mount tray for 14-series Switch models, up to 16 units
PXESDINRL = Metal DIN-Rail mounting bracket for one PXES4P Series
2.0
INTRODUCTION
This section describes PXES4P Series models, including appearance, features and
typical applications.
2.1 Inspecting the Package and the Product
Examine the shipping container for obvious damage prior to installing this
product; notify the carrier immediately of any damage which you believe occurred during
PXES4P Switches
shipment or delivery. Inspect the contents of this package for any signs of damage and
ensure that the items listed below are included.
This package should contain:
1
PXES4P Series Switch Unit
1
External Power Supply (d, i model only)
1 set
Metal panel mounting clips and screws, 2 each
1
User Guide, i.e., this manual
Installation and User Guide (10/06)
) – 15+ years, Telcordia (Bellcore SR-332) Method
Made in USA
13
Installation and User Guide (10/06)
14
Installation and User Guide (10/06)
15
(continued next page)
Advertisement
Table of Contents
