Installation; Locating The Convenient Switch Unit - Eaton Power Xpert PXES4P Series Installation And User Manual

PXES4P Switches
compact PXES4P Series 10/100 Mbps switch functions support a mixed environment of 10
Mbps and 100Mbps users. The switching full / half duplex capability on all four ports
provide bandwidth for high performance. Port #1 (on the back end) is typically used for an
up-stream connection. When expansion is needed, add another PXES4P and connect it into
port #1 with twisted pair cabling to add 3 more ports.
PO R T 3
P O R T 1 P OR T 2
G a r r e t tC o m
P O R T 4
Magnum S14
Convenient Switch
IBM Compatible IBM Compatible
Eaton PXES4P switch
PLC PLC
POR T 1 PO R T 2 P O R T 3
G a r r e t t C o m
P OR T 4
Magnum S14
Convenient Switch
Laptop computer Laptop computer
Workstation Workstation
Eaton PXES4P switch
PLC PLC
PXES4P Switches provided a secure economical solution for PXES4P Switches provided a secure economical solution for
PXES4P Switches
Example : In this application in an expanding Industrial network environment, the new
PLC units are deployed on all the present networks and need an Ethernet port to carry the
data to the main workstation being controlled by the Industrial Engineering crews. The
hardened version of PXES4P are typically used where 10/100BASE-T networking
equipment is being installed in highly controlled temp environments and require an
effective and economical solution to satisfy the need.
3.0

INSTALLATION

This section describes the installation of the PXES4P Series Switches, including
location, mountings, power supply and media connection.

3.1 Locating the Convenient Switch Unit

All the PXES4P Series Switches operate in transparent half-and full-duplex mode. The
store and forward switch easily take care of the network traffic and can be used as a useful
PXES4P Switches
economical tool to expand the existing network.
The compact and lightweight design of the S-
Series allows it to be easily installed in almost
any location.
Metal mounting clips and screws are included for
a rugged and secure mounting in any orientation.
An option DIN-Rail bracket is available.
Installation of the PXES4P Series Switches
is a simple procedure. The installation location is dependent upon the physical layout of
the Ethernet network and associated cabling. Make sure the unit is installed in a location
that is easily accessible to an AC power outlet or power strip and where convection cooling
is not inhibited. The green Power (PWR) Led must turn ON when power is applied through
the internal DC input 12V, 24V or –48V DC or external AC through 9V DC jack.
Installation and User Guide (10/06)
Magnum 6K25
W W W . G a r r e t t C o m . C o m
Eaton 10/100/1000
Configurable Ethernet Switch
PO R T 2 P O R T 3
P O RT 1
G a r r e t tC o m
PO R T 4
Magnum S14
Convenient Switch
P O R T 2 P O R T 3
P O R T 1
G a r r e ttC o m
P O R T 4
Magnum S14
Convenient Switch
Eaton PXES4P switch
Eaton PXES4P switch
IBM Compatible IBM Compatible
PLC PLC
25
expanding Industrial network expanding Industrial network
Installation and User Guide (10/06)
26
Installation and User Guide (10/06)
Secure attachment of mounting
clips for Panel-
27
P O RT 3
P O R T 1 P O R T 2
G a r r e t tC o m
P O R T 4
Magnum S14
C onvenient Switch
IBM Compatible IBM Compatible
Eaton PXES4P switch
PLC PLC
IBM Compatible IBM Compatible
Workstation Workstation
Workstation Workstation
PLC PLC