Table 2-2. Owners Annual Inspection Record; Table 2-3. Tire Specifications (Sjkb-33N); Table 2-4. Maximum Platform Capacities - Skyjack SJKB-33N Operating Manual

General Work Conditions
Read and pay attention to all labels on the unit.
DO NOT
exert excessive side forces on platform while
elevated.
DO NOT
overload, the lift relief valve does not protect
against overloading when the platform is elevated.
DO NOT
alter or disable limit switches or other safety
devices.
DO NOT
raise your platform in windy or gusty
conditions.
DO NOT
exceed the rated capacity of your unit. Make
sure the load is evenly distributed on the platform.
Jobsite Hazards
DO NOT
operate the unit on surfaces not capable of
supporting the weight of the work platform, including the
rated load, e.g. covers, drains and trenches.
BE AWARE
of overhead obstacles, especially
electrical lines. Also be aware of poorly lit areas that
might hide overhead obstacles.
Figure 1-1. Front Panel Labels
SECTION 1, Page 2
DO NOT
elevate the work platform if the unit is not on
firm level surfaces. Avoid pot holes, loading docks,
debris, drop offs and surfaces that my affect the stability
of your work platform.
DO NOT
climb or descend a grade steeper than 30%
while in travel mode. Boom elevated driving must be
done only on firm surfaces. (Ref. Table 1-1)
ENSURE
that there is no person(s) in the path of
travel.
Work Platform Conditions
An operator should not use any work platform that:
Has ladders, scaffolding or other devices mounted on it
to increase its size or work height.
Does not have a clean, uncluttered work area.
Does not appear to be working properly.
Has been damaged or appears to have worn or missing
parts.
Has alterations or modifications not approved by the
manufacturer.
Has safety devices which have been altered or disabled.
SJKB Battery Powered
BRAKE OPERATION TEST PROCEDURE
Proper operation of the parking brakes should be checked daily or at the beginning of each shift. Locate the machine
in an appropriate area for testing the brakes. IMPORTANT NOTE: The area for testing the machine MUST be
completely level and free of obstructions. DO NOT drive on an incline unless the parking brakes are working properly.
With the machine fully stowed and the throttle switch in the high position (if engine powered). Drive the machine
forward at full speed and remove foot from foot switch. Repeat this step driving in reverse.
Parking brakes will instantly engage causing the machine to stop immediately.
The machine should come to an instant and abrupt stop. If the machine does not stop instantly or if the machine pulls
to one side while stopping, the brake adjustment MUST be checked before putting the machine into service.
Table 2-2. Owner's Annual Inspection Record
MODEL NUMBER__________________________ SERIAL NUMBER______________
RECORDING
DATE
RECORDING
1 2 3
YEAR #
OWNERS
NAME
INSPECTED
BY
Table 2-3. Tire Specifications - SJKB-33N
Model Size
SJKB-33N 27.5 x 7.5 x 15
NON-MARKING(Option) 27.5 x 7.5 x 15
† - Solid urethane used for filling MUST be 75 durometer.

Table 2-4. Maximum Platform Capacities

Model
ALL MODELS
NOTE: Refer to capacity label on work platform for additional information.
RECOMMENDED HYDRAULIC OILS
DO NOT use synthetic or fire resistant oil in this work platform. Use ATF Dexron III (ESSO) or equivalent hydraulic oil.
For conditions causing oil temperatures below -31°F (-35° C) and above 122°F (50° C) consult Skyjack, Inc.
SJKB Battery Powered
WARNING
4 5 6 7
Tire
Rating Fill Specification
14 Ply Solid Urethane†
Solid
Platform Capacity (unrestricted)
500# (227kg) 2 occupants
SECTION 2, Page 13
8
MT33N203
MT33N204
MT33N205