System set-up
The system information about outdoor unit, G/W, ID/PW etc. can be seen in the system set-up.
(3) Group Select
Window
Configuration of System Setting Screen
Click on "G/W"
20 PC Central Controller
(4) Indoor information setting & temporary save window
When you click on "default", default data is set. Enter the name,
G/W setting in the G/W Setting field.
In the G/W Info., IP address will be set automatically.
The unnecessary data is deleted automatically.
When all the input data is set, click OK
Installation of PC Central Controller Software
(1) G/W Information
Setting
(2) Out door
Information Setting
(5) ID/PW Setting
(6) Reset
(7) Save