2.0 Introduction; 3.0 Set Up; Unpacking And Setting Up Your Scale - Adam Equipment CQT1751GR User Manual

2.0 INTRODUCTION

Thank you for purchasing your new grain scale which is based upon the Core series of
Balances. The CQT1751GR model has been specifically developed and designed to be
used to assist in the grading of grain to asses the quality of the grain as well as to give an
indication of the Kilograms per hectolitre (kg/Hl).

3.0 SET UP

3.1

UNPACKING AND SETTING UP YOUR SCALE

1)
Remove the shipping protection screw and round cover as shown below using the
Allen key supplied in the box. (It is advisable to keep the shipping protection screw
and the round cover along with the packing box for using during shipping to another
location in future).
2)
Place the pan (which comes separately packed) in the receptacles on the top cover.
3)
Place the stainless steel pan on top of the plastic pan.
4)
Place the balance on a firm and flat surface for accurate weighing.
©Adam Equipment Company 2009
Shipping protection screw
Round cover around the screw
5
Use the screw that you
removed to screw the plastic
pan into place. Be careful
when putting the screw in that
you do not use to much force
as it can damaged the
loadcell. You should just be
able to use light force to
secure the screw.