5.3
SETTING THE BACKLIGHT
The backlight may be enabled or disabled by the user. If the backlight is disabled, the
battery life will be longer.
The following settings are available:
1 BL
2 BL
OFF BL
1) To set this parameter turn the power off press and hold the [Recall/Tare] key then
press the [On/Off] key once, then release the [Recall/Tare] key.
2) After a few seconds, the display will show the first function PWR
3) Press the [S/P/CE] key until you the display shows you XX BL where XX is last
setting
4) Press [Recall/Tare] to select the settings as follows 1 BL - 2 BL – OFF BL
5) Press the [S/P/CE]key to confirm the setting
6) To exit turn the balance off and back on again
©Adam Equipment Company 2009
Sets the backlight to operate automatically when a weight is
placed on the scale or a key is pressed.
Sets the backlight to be on at all times.
Sets the backlight to be off.
15