Using An Auxiliary Monitor - HIKVISION DS-96128NI-E16 User Manual

User Manual of Network Video Recorder
Name
Previous Screen
Next Screen
Start/Stop Auto-switch
Start Recording
Add IP Camera
Playback
Output Mode
Aux Monitor

The dwell time of the live view configuration must be set before using Start Auto-switch.

If the corresponding camera supports intelligent function, the Reboot Intelligence option is included when
right-clicking mouse on this camera.

3.2.3 Using an Auxiliary Monitor

Certain features of the Live View are also available while in an Aux monitor. These features include:
•
Single Screen: Switch to a full screen display of the selected camera. Camera can be selected from a
dropdown list.
•
Multi-screen: Switch between different display layout options. Layout options can be selected from a
dropdown list.
•
Next Screen: When displaying less than the maximum number of cameras in Live View, clicking this feature
will switch to the next set of displays.
•
Playback: Enter into Playback mode.
Description
Switch to the previous screen.
Switch to the next screen.
Enable/disable the auto-switch of the screens.
Start continuous recording or motion detection recording of all channels.
Enter the IP Camera Management interface, and manage the cameras.
Enter the playback interface and start playing back the video of the selected
channel immediately.
Four modes of output supported, including Standard, Bright, Gentle and Vivid.
Switch to the auxiliary output mode and the operation for the main output is
disabled.
Figure 3. 1 Right-click Menu
39