HIKVISION DS-96128NI-E16 User Manual page 76

User Manual of Network Video Recorder
The record files of which the recording is still not completed cannot be locked.
2) Click to change it to
Protect file by setting HDD property to Read-only
Steps:
1. Enter HDD setting interface.
Menu> HDD
2. Click to edit the HDD you want to protect.
To edit HDD property, you need to set the storage mode of the HDD to Group. See Chapter Managing
HDD Group.
3. Set the HDD property to Read-only.
4. Click OK to save settings and back to the upper level menu.
 You cannot save any files in a Read-only HDD. If you want to save files in the HDD, change the
to unlock the file and the file is not protected.
Figure 5. 32 Unlocking Attention
Figure 5. 33 HDD General
Figure 5. 34 HDD General- Editing
75