HIKVISION DS-96128NI-E16 User Manual page 50

User Manual of Network Video Recorder
on to the next key point. The key points are corresponding to the presets. The presets can be set following the steps
above in Customizing Presets.
Steps:
1. Enter the PTZ Control interface.
Menu>Camera>PTZ>More Settings
2. Select patrol number in the drop-down list of patrol.
3. Select the under Patrol option box to add key points for the patrol.
4. Configure key point parameters, such as the key point No., duration of staying for one key point and speed of
patrol. The key point is corresponding to the preset.
The Key Point No. determines the order at which the PTZ will follow while cycling through the patrol.
The Duration refers to the time span to stay at the corresponding key point.
The Speed defines the speed at which the PTZ will move from one key point to the next.
5. Click OK to save the key point to the patrol.
Repeat the above steps to add more key points.
You can also delete all the key points by clicking the trash icon
Select a key point, then click
Figure 4. 6
PTZ- Add Key Point
Figure 4. 7
Key point Configuration
or button to adjust the order of the key points.
49
.