User Manual of Network Video Recorder
Product Key Features
General
Connectable to network cameras, network dome and encoders.
Connectable to the third-party network cameras like ACTI, Arecont, AXIS, Bosch, Brickcom, Canon,
PANASONIC, Pelco, SAMSUNG, SANYO, SONY, Vivotek and ZAVIO, and cameras that adopt ONVIF or
PSIA protocol.
Connectable to the smart IP cameras.
PAL/NTSC adaptive video inputs.
Each channel supports dual-stream.
Up to 256 network cameras can be connected.
Independent configuration for each channel, including resolution, frame rate, bit rate, image quality, etc..
The quality of the input and output record is configurable.
A redundant power supply is provided to improve the system stability.
Local Monitoring
Simultaneous HDMI1/VGA/LCD output as the main output and the HDMI2 works as the auxiliary output.
All video outputs at up to 1920× 1080 resolution.
Up to 64-window division display mode for the HDMI1/VGA/LCD output, and 16-window division display
mode for HDMI2-6 outputs. The display sequence of channels is adjustable.
Multi-screen display supported by the HDMI 3-6 outputs of /H models.
Live view screen can be switched in group, and manual switch and auto-switch live view are also provided,
and the interval of automatic cycle can be adjusted.
Quick setting menu is provided for live view.
Motion detection, video tampering, video exception alert and video loss alert functions.
Privacy mask.
Multiple PTZ protocols supported; PTZ preset, patrol and pattern.
Zooming in by clicking the mouse and 3D positioning by dragging mouse.
HDD Management
Up to 24 SATA hard disks and 1 eSATA disk can be connected. (Each disk with a maximum of 4TB storage
capacity.)
8 network disks (8 NAS disks, or 7 NAS disks+1 IP SAN disk) can be connected.
The SAS expansion enclosure can be connected for the expanded storage via the miniSAS interface.
Support eSATA disks for recording or backup.
Support S.M.A.R.T. and bad sector detection. (Not supported when the RAID function is enabled.)
HDD group management.
Support HDD standby function.
HDD property: redundancy, read-only, read/write (R/W).
HDD quota management; different capacity can be assigned to different channel.
Support RAID0, RAID1, RAID5 and RAID10 storage scheme, and can be enabled and disabled on your
demand.
Recording and Playback
Holiday recording schedule configuration.
Continuous and event video recording parameters.
Multiple recording types: manual, continuous, alarm, motion, motion | alarm, motion & alarm.
6