Dsp Effect; Mixer - Medeli CDP5200 Owner's Manual

DSP Effect

With the built in digital effects, you can add ambiance and depth to
your music in a variety of ways such as adding reverb that makes
you sound like you are playing in a concert hall or adding harmony
notes for a full, rich sound.
1.
The DSP effect is set to ON and the icon on the LCD is lightened
when keyboard is power on. The chorus and reverb value can be
adjusted in the function menu.
2.
Holding down [SHIFT] button, and then press the [DSP] button to
turn DSP effect on or off.
Note:
It may cause a break or a noise while switching on/off the DSP when
style and song playing. This is normal and need not panic.

Mixer

Mixer function can control the volume of different tracks.
1.
Holding down [SHIFT] button, and then press the [RHYTHM] button
to set the Rhythm track volume. LCD displays "Rhythm" and the
track volume.
2.
When the LCD displays "Rhythm" , use the data dial or the
[+/YES]/[-/NO] button to adjust the value. Pressing [+/YES] and
[-/NO] button simultaneously can turn off/on a track volume.
3.
The volume of other tracks such as Bass, Chord, Lower, and
Upper can be set the same to Rhythm track.
Note:
In voice R1 setting status, the [UPPER] button adjusts the main voice
volume. In voice R2 setting status, the [UPPER] button adjusts the R2
voice volume.
22
AW_CDP5200_Manual_G09_140718
2014 7 18 17:19:15
StGrdPno
Rhythm
The option and parameters are as follows:
LCD Display Range
Rhythm: xxx 0 - 127
Bass: xxx 0 - 127
Chord: xxx 0 - 127
Lower: xxx 0 - 127
Upper: xxx 0 - 127
100
95
75
25
5
0