Beattype; Metro Volume; Pedal Type; Reverb Volume - Medeli CDP5200 Owner's Manual

Beat Type
1.
Holding down [SHIFT] button, and then press [FUNCTION
button to select beat type menu. LCD displays "xxx BeatType".
Use [+/YES]/ [-/NO] or data dial to change beat type. The range of
beat type: 0, 2~9.
2.
Press [+/YES] and [-/NO] simultaneously will set the beat type value
to its default setting: 004.

Metro Volume

1.
Holding down [SHIFT] button, and then press [FUNCTION
button to select beat volume menu. LCD displays "xxx MetroVol".
Use [+/YES]/ [-/NO] or data dial to change beat volume. The range
of beat volume: 0~127.
2.
Press [+/YES] and [-/NO] simultaneously will set the beat volume
value to its default setting: 090.

Pedal Type

1.
Holding down [SHIFT] button, and then press [FUNCTION
to select pedal type menu. LCD displays "00x Pedal xxxx".
Use [+/YES]/ [-/NO] or data dial to change pedal type. 3 types of
pedal are available: sustain pedal(Sust), accompaniment start/stop
Pedal(St/T), memory switch pedal(Mem).
2.
Press [+/YES] and [-/NO] simultaneously will set the pedal type to its
default setting: Sust.

Reverb Volume

1.
Holding down [SHIFT] button, and then press [FUNCTION
to select reverb volume menu. LCD displays "xxx ReverbVol".
Use [+/YES]/ [-/NO] or data dial to change reverb volume.
Range: 0~127
2.
Press [+/YES] and [-/NO] simultaneously will set the reverb volume
to its default setting.
Note:
The reverb volume default value depends on the voice.
AW_CDP5200_Manual_G09_140718
2014 7 18 17:19:16
</> ]
</> ]
</> ] button
</> ] button
Function Menu

BeatType

MetroVol
Pedal Sust
ReverbVol
100
95
75
25
5
0
25