Dsp Effect - Medeli Grand 510 Owner's Manual

aw_Grand510_Manual_G03_180408.pdf 24 18/4/8 15:07

DSP Effect

The DSP effects will add ambiance and depth to your performance in
a variety of ways. They can be set to simulate sound from a real
environment, making your tone more crystal and strong, or even give
you distortion for a rougher edge. Experiment with the various effects
to find the ones that work best for you.
Turn the DSP Effect on or off.
The DSP effect is turned on by default. You can press the [DSP] button
to turn the function on or off.
Set the DSP Effect.
1.
Press and hold the [DSP] button to enter the DSP settings menu.
2.
Use the data dial to select a parameter.
3.
Use the [+/YES]/ [-/NO] buttons to change the settings of the
selected parameter.
DSP effect parameters and their ranges:
Parameter
Voice R1 DSP Effect Type
C
Voice R1 DSP Effect Level
M
Voice R1 Global Reverb Level Send
Y
Voice R1 Global Chorus Level Send
CM
Voice R2 DSP Effect Type
MY
CY
Voice R2 DSP Effect Level
CMY
Voice R2 Global Reverb Level Send
K
Voice R2 Global Chorus Level Send
Voice L DSP Effect Type
Voice L DSP Effect Level
Voice L Global Reverb Level Send
Voice L Global Chorus Level Send
Microphone DSP Effect Type
Microphone DSP Effect Level
Microphone Global Reverb Level Send
Microphone Global Chorus Level Send
Global Reverb Type
Global Reverb Level
Global Chorus Type
Global Chorus Level
Note:
There may be a slight pause in the sound if you switch the DSP effect on/off while style or song is playing.
24
Display Range
R1 DSP TYPE xxx Hall, Room, Crs.Dely, Tp.Delay, Tp.Echo, Chorus,
Flanger, Phaser, Overdriv, Amp, Metl.Dst, Hard.Dst,
Tremolo, Auto.Wah, Tp.Wah, None(Off)
R1 DSP LEVEL xxx 0-32
R1 G.REV SEND xxx 0-32
0-32
R1 G.CHR SEND xxx
R2 DSP TYPE xxx Hall, Room, Crs.Dely, Tp.Delay, Tp.Echo, Chorus,
Flanger, Phaser, Overdriv, Amp, Metl.Dst, Hard.Dst,
Tremolo, Auto.Wah, Tp.Wah, None(Off)
xxx 0-32
R2 DSP LEVEL
R2 G.REV SEND xxx 0-32
R2 G.CHR SEND xxx 0-32
L DSP TYPE xxx Hall, Room, Crs.Dely, Tp.Delay, Tp.Echo, Chorus,
Flanger, Phaser, Overdriv, Amp, Metl.Dst, Hard.Dst,
Tremolo, Auto.Wah, Tp.Wah, None(Off)
L DSP LEVEL xxx 0-32
L G.REV SEND xxx 0-32
L G.CHR SEND xxx 0-32
MIC DSP TYPE xxx Echo1, Echo2, Echo3, Phaser1, Phaser2, Enhanc,
Wah, Overdv1, Overdv2, Lo-Fi, Comp, Gate, None(Off)
MIC DSP LEVEL xxx 0-32
MIC G.REV SEND xxx 0-32
0-32
MIC G.CHR SEND xxx
G.REV TYPE xxx Hall1, Hall2, Hall3, Hall4, Pno.Hall, Room1, Room2,
Room3, Church, Garage, Std.Hall
G.REV LEVEL xxx 0-32
Chorus1, Chorus2, Chorus3, Chorus4, GM.Chr1,
G.CHR TYPE xxx
GM.Chr2, Celeste1, Celeste2, Sympho1, Sympho2,
Doubler, Std.Chr
G.CHR LEVEL xxx 0-32