Media feeder removal
1
Remove the right cover. See
2
Remove the rear lower cover. See
3
Remove the LVPS. See
4
Remove the left cover. See
5
Remove the PCBA housing. See
6
Remove the pick roller assembly. See
7
Remove the three screws (A) securing the media feeder to the machine.
Note: Use care when removing the media feeder to avoid damage.
"Right cover removal" on page
"Rear lower cover removal" on page
"LVPS removal" on page
"Left cover removal" on page
"PCBA housing removal" on page
"Pick roller assembly removal" on page
Repair information
278.
276.
357.
273.
348.
347
333.
4063