Lower Interface Cable Removal; Upper Interface Cable Removal - Lexmark MS81 Series Service Manual

Lower interface cable removal

1
Remove the left cover. See
2
Disconnect the lower interface cable (J1) from the controller PCBA.
3
Push inward to release the latches, then push the connector out of its slot.
4
Remove the lower interface cable.

Upper interface cable removal

1
Remove the sensor cover. See
2
Remove the left cover. See
"Output expander left cover removal" on page
"Output expander sensor cover removal" on page
"Output expander left cover removal" on page
Repair information
443.
443.
446
440.
4063