Lexmark MS81 Series Service Manual page 52

Error code Description
200.05 Media reached the sensor (input) but did not
clear it within the specified time. (Media
source = MPF tray)
200.07 Media reached the sensor (input) but did not
clear it within the specified time.
200.08 Media is late reaching the sensor (input)
within the specified time.
200.09 The proper main motor feedback to start
laser servo was not received.
200.10 Printhead motor was not locked when page
reached the sensor (input).
200.11 Printhead motor fell out of lock after the
page reached the sensor (input).
200.12 Printhead was not ready for the page when
the sensor (input) was reached.
200.13 The page at the sensor (input) is not the next
page to be imaged.
200.14 Proper main motor feedback to start laser
servo was not received.
200.15 Media reached the sensor (input) but did not
clear it within the specified time. (Media
source = Tray 1)
200.16 Main drive motor stalled.
200.17 Fuser motor stalled.
200.19 Paper never reached the sensor (input), but
it was successfully picked from the source.
200.25 Media reached the sensor (input) but did not
clear it within the specified time. (Media
source = Tray 2)
200.32 Detected sensor (control panel interlock)
bounce.
200.33 Printhead was not ready for page when
sensor (input) was reached.
200.34 Short media detected.
200.35 Media reached the sensor (input) but did not
clear it within the specified time. (Media
source = Tray 3)
200.45 Media reached the sensor (input), but did not
clear it within the specified time. (Media
source = Tray 4)
Action
See "Sensor (input) late-leaving or did-not-clear jam service
check" on page 56.
See "Sensor (input) late-leaving or did-not-clear jam service
check" on page 56.
See "Sensor (input) never‑ or late‑arriving jam service check"
on page 54.
See "Main drive motor control jam service check" on page
57.
See "Printhead motor control jam service check" on page
58.
See "Printhead motor control jam service check" on page
58.
See "Printhead motor control jam service check" on page
58.
See "Sensor (input) miscellaneous jam 1 service check" on
page 58.
See "Main drive motor control jam service check" on page
57.
See "Sensor (input) late-leaving or did-not-clear jam service
check" on page 56.
See "Main drive motor control jam service check" on page
57.
See "Fuser drive motor control jam service check" on page
58.
See "Sensor (input) miscellaneous jam 1 service check" on
page 58.
See "Sensor (input) late-leaving or did-not-clear jam service
check" on page 56.
See "Sensor (input) miscellaneous jam 2 service check" on
page 59.
See "Printhead motor control jam service check" on page
58.
See "Sensor (input) miscellaneous jam 3 service check" on
page 59.
See "Sensor (input) late-leaving or did-not-clear jam service
check" on page 56.
See "Sensor (input) late-leaving or did-not-clear jam service
check" on page 56.
Diagnostic information
52
4063