2
Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the
edges on a level surface.
3
Reload paper into the multipurpose feeder.
4
Slide the paper guide until it lightly rests against the edge of the paper.
5
To clear the message and continue printing, select Next >
250 paper jams
Error code Description
250.02
The input sensor detected a late feed during
a pick retry from the MPF media tray
250.06
The media is late reaching the sensor (input)
within the specified time from the MPF media
tray
> Clear the jam, press OK >
Action
See
"Sensor (input) early arriving jam service check" on page
53.
See
"Sensor (input) never-arriving jam from MPF media tray
service check" on page
Diagnostic information
83
.
84.
4063