XPRT-6kVA, XPRT-10kVA USER'S MANUAL
Switching the UPS OFF
1. Make sure that the load has been shut down in an orderly manner.
2. Turn the OUTPUT CIRCUIT BREAKER to OFF position (FIG 65).
3. Press the keypad
Press the keypad
4. Turn the INPUT CIRCUIT BREAKER to OFF position (FIG 65).
If electrical isolation is required (e.g. for maintenance purposes) proceed with the following steps
5. Turn the INPUT CIRCUIT BREAKER to OFF position (FIG 66).
Xtreme Power Conversion® (XPC) Corporation
(FIG 64) for 1 second to switch the UPS to BYPASS.
FIG 64 – TO TURN THE UPS OFF
(FIG 64) for a second time for 1 second to switch the UPS OFF.
FIG 65 – 10KVA OUTPUT BREAKER
UNINTERRUPTIBLE POWER SUPPLY (UPS)
Page 53