Table of Contents
Advertisement
P90-BP36, BP48, BP72 User's Manual
1. DC connector : connects to either UPS or 2nd battery box
2. DC breaker: Battery over-current protection breaker
Installation and Setup with UPS
Unpacking & Inspection
1. Remove the battery box from the packing.
Note: The battery box is very heavy, be cautious when unpacking and lifting the unit to avoid injury.
2. Check the inside package
•
Battery box unit
•
Manual
•
Battery connection cable x 1
•
Ear x 2 & screw x 8
•
Extended stand
Selecting Installation Position
It is necessary to select a proper environment to install the unit, in order to minimize the possibility of damage to
the battery box and extend the life of the batteries. Please follow the instructions below:
1. Keep at least 20cm (8 inches) clearance from the rear panel of the unit from the wall or other obstructions.
2. Do not block the air-flow to the ventilation openings of the unit.
3. Please ensure the installation site environmental conditions are in accordance with the unit's working
specifications to avoid overheat and excessive moisture.
4. Do not place the unit in a dusty or corrosive environment or near any flammable objects.
5. This unit is not designed for outdoor use.
This unit can either be rack mounted or placed vertically on the desk.
Rack Installation
Tower Installation
Xtreme Power Conversion Corporation
External Battery Packs
Page 4
Advertisement
Table of Contents
