Menu 7 Job Clear
Cancels the currently printed job and clears the data.
What is Job?
When data is transmitted from a computer to the printer, the controller processes the data and sends the print data to the FORCEJET
The processed data is called "Job."
"Job" means the data shown below.
• Data suspended temporarily
• Data for which additional printing is set with the Temporary Data Retrieve function.
1
Press the MENU Key.
2
Press the
or
Clear."
3
Press the OK Key.
4
Check the message. To clear, press the
OK Key.
Message "Executing" is displayed and the data is cleared.
If the CANCEL key is pressed, the screen in step 2
appears again.
When the screen in step 2 reappears, you can continue set-
ting.
To exit the setting, press the PRINT/ PAUSE Key.
key to display "Job
™
ENGINE.
2
2-55