Table of Contents
Advertisement
5.6 Configuration Information Print
Configuration settings are printed in a list. Current printer settings and menu settings can be checked in a list.
Settings
5.6.1
System Information
5.6.2
Menu Setting
5.6.4
Count Pattern
Restrictions in configuration information print
• Perform configuration information print when printing is not being performed, for exammple, when "Ready" is displayed.
• Configuration Information Print can be printed only on paper loaded on the Standard Feed Tray.
("Menu 6 Feed Tray Selection" is automatically set to Standard Feed Tray.)
• For Configuration Information Print, A4-sized paper is required. When "No Paper" is displayed, load A4-sized paper onto the Stan-
dard Feed Tray.
The counter of the finisher functions is composed of the Finisher Counter number and the number of times. Finisher Counter
number means the finisher function. (Only when the HC Finisher is connected.)
Finisher Count number
Finisher Counter1
Finisher Counter2
Finisher Counter3
Finisher Counter4
Finisher Counter5
Finisher Counter6
Finisher Counter7
Finisher Counter8
Finisher Counter9
When the number of times is printed as [ ***], it means that finisher function is not available with your finisher.
2-42
Information such as printer memory capacity, firmware version, and IP
address can be checked in a list.
The menu settings made on the operation panel can be checked in a list.
The result of "5.4.3 Count Pattern" and the count of the finisher function
(only if an optional finisher is connected) can be checked in a list.
Meaning (function)
Punching / 2 holes
Punching / 3 or 4 holes
Stapler / Rear 1 position
Stapler / Front 1 position
Stapler / 2 positions
Booklet / Fold and staple
Booklet / Fold
N/A
Cover Sheet Tray feeding
Advertisement
Table of Contents
