Setting The Clock - Brasilia Excelsior Instructions For Use Manual

5. – SETTING THE CLOCK
WARNING: The clock must be set when
the machine is cold, turned off and with its
main power switch deactivated.
The clock (1) located on the control panel can be
adjusted
To set the time:
Unhook the neon (2); to do this, slide your fingers
under the front and gently pull the neon (2)
downwards.
• Use a 7 mm hexagonal wrench to unscrew the
screw (3) from the back of the clock; remove the
screw (3) with the supporting bracket (4).
• Set the time by rotating the pin (5).
• Reassemble everything in inverse order.
Rev 0 - 09-2008 ENGLISH / 17