CONTENTS GENERAL INSTRUCTIONS................4 1.1 - Explanation of symbols ................5 1.2 - Use foreseen .................... 5 1.3 - Improper use .................... 5 CARACTERISTICS................... 6 2.1 - Description of the machine ................ 6 2.2 - Technical specifications ................7 UNPACKING AND PLACEMENT ..............
Page 5
CONTENTS 12 - USE ........................ 19 12.1 - Starting the machine ................19 12.2 - Coffee dispensing ................. 19 12.3 - General instructions for proper dispensing .......... 20 12.4 - Dispensing hot water ................20 12.5 - Dispensing steam .................. 21 12.6 - Making cappuccino with the steam wand ..........
Page 6
Dear Madam, Dear Sir, Congratulations on choosing a BRASILIA coffee machine. Your new machine, which has innovative parts guaranteed by the know-how and experience of the Rossi group, has been built and tested using state-of-the-art research and technology methods in order to assure you quality and reliability in harmony with the environment and to enable you to operate with maximum efficiency and convenience.
1. GENERAL INSTRUCTIONS BRASILIA S.p.A. has taken every possible measure to ensure that the equipment operates safely and efficiently. BRASILIA equipment comes with built-in safety devices to protect both users and authorised technicians. • Read this manual carefully before installing the machine, starting it up and using it. Not doing so could cause damage to the equipment, poor performance by the machine and health risks or personal injury.
• if the INSTALLER, or the MAINTENANCE TECHNICIAN, is not authorised and specialised; • The INSTALLER or MAINTENANCE TECHNICIAN should inform the manufacturer about ANY MALFUNCTIONS or improper uses that could adversely affect the original safety of the system. • CHECK ON the condition of the parts and, if they are faulty, stop the installation and ask for them to be replaced.
2. CARACTERISTICS 2.1 - DESCRIPTION OF THE MACHINE The main features of the automatic espresso coffee machine are set out below. Automatic machine for making coffee with powder or with cartridges (on request), with dosage electronically controlled by a microprocessor unit and keyboard. Boiler fills automatically Stainless steel body Boiler: For containing hot water and steam;...
5. CONNECTIONS N.B.: the connecting up of the machine must be done by an authorised expert technician. 5.1 - WATER CONNECTION • Remove the basin (1) together with the cup-holder grid. Drainage There should be a drainpipe (2) with a siphon near the machine.
5.2 - ELECTRIC POWER CONNECTION • Make sure that all the switches are in the OFF position before connecting the machine to the power • It is compulsory for the machine to be earthed and the system must be compliant with the regulations in force in the country of installation.
” paragraph. Type of software • Switch off the machine by turning the knob (1) to OFF and turn off the water supply tap. 3D5 DL ECO REV.X.YY Revision AGILE Select Brewing Espresso Rev 1 - 05-2008 ENGLISH / 11...
7. OPERATION Regulation of certain parts of the machine must be done by an authorised expert technician, with the machine in operation, taking great precaution. • Start the machine as indicated in the paragraph on “Use”, lift up the cup-heater grid (1) and remove it so as to get at the inside parts of the machine.
8. TECHNICAL PROGRAMMING This phase of programming must only be done by an expert, authorised technician. SETTING DATA Start up the machine as explained in the paragraph 15) Maintenance cycles on “USE”, and then do the following to enter the •...
Groups Number Mixed Tea water You can set the number of groups present in the ma- You can enable or disable the operation of the pump chine: press button (1) to increase the number, or button while dispensing water through the wand; press but- (2) to decrease it, then press button (5) to go on to the ton (1) or (2), “No”...
Data preset FillingUp T-Out Completed then release the buttons and turn the handle (M) to You can set the maximum opening time for the solenoid “OFF” and then “ON”. valve for filling water into the boiler. The value settable is from 10 minutes to a maximum of 250 minutes with RESETTING THE FILTER ALARM an interval of one minute.
9 - USER PROGRAMMING Without entering technical programming it is possible to set the amount dispensed for each type of dispens- • Place a cup under the hot-water wand. ing; it is also possible to display the quantity of doses •...
• This screen displays the total number of litres of • This screen displays the total number of coffees water dispensed, when you press button (5) the made, when you press button (5) the following screen following screen appears: appears: Service ZZZZZZ Gr:Y...
NAMES OF BUTTONS AND INDICATOR LIGHTS • Sequential steam-dispensing levers (1): Steam dispensing starts when you move the lever upwards; the lever has two dispensing positions: the first turns on the tap for dispensing about 50% of the flow of steam, the second dispenses 100%. To stop dispensing move the lever back to the lower position.
Wait for the water temperature to reach the value set, indicated by light (3) going out. Check that the boiler pressure, shown by pressure gauge (5), is 1-1.3 bars. AGILE 12.2 - COFFEE DISPENSING Select Brewing 1) Remove the group (A) filter holder and throw away any coffee grounds remaining from the previous brew.
4) After fitting the filter holder in properly, place a previously heated cup under the nozzle (1). Use two cups for a double filter holder. 5) To start dispensing press the button located on the button panel (2), for the type of coffee desired (Espresso, weak coffee etc.);...
12.5 - DISPENSING STEAM 1) Pour the beverage to be heated into a heat-resistant jug, preferably stainless steel, and place it under the steam wand (1). 2) Immerse the nozzle (2) of the wand (1) in the liquid and raise the lever (3) to the first or second position depending on the amount of steam desired.
12.7 - MAKING CAPPUCCINO WITH THE CAPPUCCINO ATTACHMENT (Optional) 1) Immerse the milk suction tube (1) in a container with fresh milk (recommended temperature +4°C). 2) Place a cup containing freshly made espresso coffee under the cappuccino attachment (2) and press switch (3).
• Filter alarm. To exit the alarm phase, switch the machine off and The following screen appears on the display: switch it on again; if the signal comes on again you should call the technical assistance service. ChangeWaterFilt. Flow meter alarm. XXXXXXX The following screen appears on the display: •...
14.2 - AUTOMATIC WASHING OF GROUPS NOTE: Automatic washing of the groups is done at the end of every shift, with the coffee machine in operation: • Unclip the filter holder (1) of the fist group and empty • Take out the filter and insert the blind filter in the holder.
Cleaning the cup-holder grid and basin • Remove the cup-holder grid (6), pull out the dregs- collection basin (7) and wash it with running wa- ter. Cleaning the body • Use a damp non-abrasive cloth on all surfaces. Do not use products containing alcohol or ammonia, which would damage the machine’s parts.
14.5 - TEMPORARY OUT OF USE If the machine is not going to be used for a long time the following operations should be carried out: • Do the maintenance operations. • Disconnect the water and electricity supplies. • Empty the water out of the boiler, following these instructions: Before carrying out this operation make sure that the coffee machine is switched...
15. TROUBLESHOOTING If there are any malfunctions switch the machine off immediately and unplug it. Call the Authorised Service Centre PROBLEMS CAUSES SOLUTIONS Coffee is coming out of the There are residues of dirt in the seat of Clean sides of the filter holder. the filter holder, which prevent the cof- fee from passing through the nozzle.
16. DISMANTLING • Taking the machine out of use must be done by authorised staff. The pressure of the water circuit must be fully lowered, the power cord disconnected and any substances potentially harmful to the environment must be disposed of legally and properly. •...
Need help?
Do you have a question about the Agile and is the answer not in the manual?
Questions and answers