Controls Description - Brasilia Excelsior Instructions For Use Manual

3. CONTROLS DESCRIPTION

• Switches and indicators (13-14-15-17)
Main switch, when pressed it lights up and brings
ON/OFF
power to the system (solenoid valves, pump,
etc.).
Heating switch, when pressed it lights up and
starts heating the boiler water; the light (14a) will
turn off once the right appropriate temperature
has been reached.
Central segment of the cup-heater switch, when
pressed it lights up and activates the resistance
for the central segment of the cup-heater.
Side segments of the cup-heater switch, when
pressed it lights up and activates the resistances
for the side segments of the cup-heater.
• Water tap knob (4)
Turning it anti-clockwise causes the wand (10)
to dispense hot water.
To stop dispensing water, turn the knob
clockwise to turn off the tap.
• Water level Indicator (7)
Marks the boiler water level. While the water is
automatically loading, the indicator lamp (7a) lights
up. It will turn off once the water has reached the
operational level, which is one mark below the
maximum level.
• Gauge (3)
The gauge (3) is divided in two parts:
• the upper part (3a) displays boiler pressure, which
should be 0.9/1.1 bar;
• the lower part (3b) displays the pump's operational
pressure, which, while dispensing coffee, should be
9 bar approximately.
ENGLISH / 10
6
8a
ON/OFF
15
13a
3a
16a
2
1
3
15
9
3b
16b
Rev 0 - 09-2008
MAX
MIN
3
16