Accessing Drives On The Rtu Master Network; Using V*S Utilities - Reliance electric 1203-USB Instruction Manual

D-6
The AK-U0-RJ45-TB2P two-position terminal block connector
used to conveniently daisy-chain the MDI Class drives from Drive 1, which is
connected to the 1203-USB converter. Two terminating resistors are also included
with terminal block connectors in the AK-U0-RJ45-TB2P kit.
Figure D.3 – AK-U0-RJ45-TB2P Terminal Block Connector
Figure D.4 shows a wiring diagram for using the AK-U0-RJ45-TB2P terminal block
connectors.
To Slave Port on
(connected to Drive 1)
Figure D.4 – AK-U0-RJ45-TB2P Connector Wiring Diagram

Accessing Drives on the RTU Master Network

Using one of the Reliance Electric drive software tools enables you to monitor,
configure, and control any of the drives on the RTU Master network. You can also
monitor and configure the 1203-USB converter.

Using V*S Utilities

Splitter Cable
To Drive 2
120 Ω
¼ Watt
Resistor
(Figure D.3) can be
To Drive 32
120 Ω
. . .
¼ Watt
. . .
Resistor
USB Converter User Manual