Configuring the Converter
4. Click OK to display the Connect To screen
5. From the "Connect using" pulldown list, select the communications port noted in
Step 1 on
Page
4-5.
6. Click OK to display the COM Properties screen
7. Select the settings shown in Figure 4.4.
8. Click OK. A blank HyperTerminal workspace appears.
Important: Select File > Save to save the HyperTerminal configuration that you just
created. In future connections, you can select the saved configuration and
quickly connect to the 1203-USB converter.
(Figure
Figure 4.3 – Connect To Screen
Figure 4.4 – COM Properties Screen
4.3).
(Figure
4.4).
4-7