Using The Dpi Class Oim - Reliance electric 1203-USB Instruction Manual

4.2 Using the DPI Class OIM

4-2
If you are connected to a DPI drive and it has an LED or LCD OIM (Operator Interface
Module), you can use the OIM to access and edit parameters in the 1203-USB
converter (see basic steps shown below). It is recommended that you read through
the steps for your OIM before performing the sequence. For additional OIM
information, refer to your DPI Drive User Manual.
Step
1. Press ALT and then Sel
(Device) to display the
Device Screen.
2. Press the Up Arrow or
Down Arrow to scroll to
the 1203-USB converter.
Letters represent files in
the drive, and numbers
represent ports. The
converter is usually
connected to port 2 (the
external port) and
sometimes to port 3
(available with a splitter).
3. Press the Enter key to
enter your selection. A
parameter database is
constructed, and then the
first parameter is
displayed.
4. Edit the parameters using
the same techniques that
you use to edit drive
parameters.
Table 4.2 – LED OIM Quick Start
Key(s)
Device
ALT Sel
OR
Example Screens
Parameter
Number
Port Number
USB Converter User Manual