Reliance electric 1203-USB Instruction Manual page 47

Flash Updates
Appendix C provides information on flash updating host or peripheral product
firmware.
Preparing for Flash Update
Performing a Flash Update with V*S Utilities
Performing a Flash Update with HyperTerminal
Troubleshooting HyperTerminal Flash
Preparing for a Flash Update
Please take the following precautions to ensure a successful flash update:
•
Obtain the new firmware version from Rockwell Automation, Inc. Save it to the hard
drive of the computer. Do not attempt to perform a flash update from a removable
storage device or a network.
•
Read all instructions supplied with the new firmware file.
•
Use a computer running terminal emulation software that supports Xmodem
transfers (for example, HyperTerminal). In this manual, we show how to use
HyperTerminal.
•
Record parameter values in the device that will be flashed. Updates may reset
parameters to their default settings.
•
Ensure that the host drive (e.g., a SP600) is stopped.
•
Close all programs except the terminal emulation program that you are using to
flash update the device.
•
Disable the screen saver and anti-virus programs so that they do not start during the
flash update.
•
Depending on the type of drive, verify this parameter setting:
•
DPI drives: Interface Mode (06) set to "Auto"
•
DSI drives: Adapter Cfg (01) set to "Auto"
A
Topic
PPENDIX
Flash Updates
Page
C-1
C-2
C-7
C-9
C
C-1