Configuring The Converter; Configuration Tools - Reliance electric 1203-USB Instruction Manual

4.1 Configuration Tools

Configuring the Converter

Chapter 4 provides instructions and information for configuring the 1203-USB
converter.
Configuration Tools
Using the DPI Class OIM
Using the MDI Class OIM
Using V*S Utilities
V*S Utilities Quick Start
Using Terminal Emulation Software
Resetting the Converter
The 1203-USB converter stores parameters and other information in its own
Non-Volatile Storage (NVS) memory. You must, therefore, access the converter to
view and edit its parameters. The following tools can be used to access the converter
parameters:
DPI Class OIM (20-OIM-*)
MDI Class OIM (33-OIM-*)
V*S Utilities Software (version 4.06 or higher)
Terminal emulation software
Important: The RS-485 serial port on MDI drives does not need to be configured
before using the converter. MDI communications are configured
automatically (19.2K baud and 8-N-1).
Configuring the Converter
Topic
Table 4.1 – Configuration Tools
Tool
C
HAPTER
4-1
4-2
4-4
4-4
4-5
4-6
4-8
Refer to...
Page 4-2
Page 4-4
Page 4-4
Page 4-6
4
Page
4-1