Reliance electric 1203-USB Instruction Manual page 38

5-10
Description
You are connected to a DMDI drive,
converter Adapter Cfg (04) is set to
"4" (RTU Passthru), and the
diamond status indicator is flashing
red.
Table 5.9 – Troubleshooting Potential Problems
Power cycle the drive to which the converter
is connected. Then do one of the following:
• HyperTerminal – Connect to the drive
through the converter. Then
simultaneously press the Ctrl and P
keys as your initial command (instead of
Enter).
• V*S Utilites (v4.06 or higher) – Connect
to the drive through the converter.
Action
USB Converter User Manual