Viewing And Clearing The Event Queue - Reliance electric 1203-USB Instruction Manual

5.3 Viewing and Clearing the Event Queue

5.3.1 To view the event queue
Troubleshooting
No.
1 Field Flash Cnt
2 Adapter Events
3 Reference
4 Logic Cmd
5 Logic Sts
6 Feedback
7 Clear MDI Counts
8 MDI Packets Sent
9 MDI Packets Rcvd
10 MDI Bad Packet
11 MDI Retries
The converter maintains an event queue that reports the history of its actions.
1. Access the event queue using a configuration tool
page 4-1.).
2. Scroll through events in the event queue. The most recent event can be found at
2R > Event Queue 1. The "R" stands for Read Only.
Press the UP ARROW or DOWN ARROW key to scroll through the
parameter list. Press the LEFT ARROW or RIGHT ARROW key to
modify parameter values. Press the ENTER key to save a new
value.
2R> Event Queue 1 = Normal Startup
Figure 5.2 – Example Event Queue in HyperTerminal
Table 5.6 – For MDI Drives
Name
Number of times the module has been Field
Flashed.
Number of events in the event queue.
Present value of the Reference being
transmitted to the drive by the converter.
Present value of the Logic Command being
transmitted to the drive by the converter.
Present value of the Logic Status being
received from the drive by the converter.
Present value of the Feedback being received
from the drive by the converter.
Clears the MDI counters.
MDI (Modbus) packets sent by the converter.
MDI (Modbus) packets received by the
converter.
MDI packets received with a bad Cyclic
Redundancy Check (CRC).
Number of times a MDI received no response
and was re-sent.
Description
(See "Configuration Tools" on
5-5