Cisco PRP-2 Installation And Configuration Manual page 41

Insert the PRP-3 into the Cisco XR 12000 Series Router chassis.
Step 5
Turboboot the PRP-3 as indicated in section
Step 6
After PRP-3 finishes loading Cisco IOS XR Software image, load the converted Cisco IOS XR Software
Step 7
configuration.
Verify that all configurations are properly configured on PRP-3 and if the traffic has resumed.
Step 8
Pre-Staging Approach
To upgrade PRP-1 or PRP-2 with Cisco IOS Software to PRP-3 execute the following steps:
Save the Cisco IOS software configuration to a local computer.
Step 1
Convert the Cisco IOS software configuration to Cisco IOS XR software configuration using the web
Step 2
tool
Step 3 Double check the converted Cisco IOS XR software configuration and any missing configurations.
Modify the interface configuration to be pre-configured.
Step 4 Insert PRP-3 into a standalone Cisco XR 12000 Series Router chassis.
Step 5 Turboboot PRP-3 as indicated in section
Load the converted Cisco IOS XR software pre-configuration on PRP-3.
Step 6
Remove the PRP-2 from the working chassis and insert the PRP-3.
Step 7
PRP-3 loads the Cisco IOS XR software image, recognizes LCs in the chassis, and loads the
Step 8
pre-configuration.
Verify that all configurations are properly configured on PRP-3 and the traffic has been resumed.
Step 9
Configuring Interfaces on the PRP
This section includes configuration and connection information for the Ethernet, console, and auxiliary
interfaces on the PRP, and includes the following sections:
•
•
•
Configuring an Ethernet Interface
PRP Ethernet interface connection and configuration information is presented in the following sections:
•
•
•
OL-17436-01
http://sox.ecsforge.cisco.com/twiki/prod/bin/view/Sox/SoxTryOut
Configuring an Ethernet Interface, page 41
Configuring the Console Interface, page 46
Configuring the Auxiliary Interface, page 48
Ethernet Interface Receptacles, Cables, and Pinouts, page 42
Ethernet Interface Cable Connection Procedure, page 44
Configuring the Ethernet Interfaces, page 45
Turboboot Approach, page
Turboboot Approach, page
Configuring Interfaces on the PRP
39.
39.
41