Cisco PRP-2 Installation And Configuration Manual page 27

(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco IOS XR Software for the Cisco XR PRP, Version 3.8.0.15I
Copyright (c) 2008 by Cisco Systems, Inc.
RP/0/2/CPU0:Sep 10 16:34:19.351: syslogd_helper: [84]: dsc_event_handler: Got SysMgr dSC
event : 1
The LED message "I404/MRAM" is displayed between RDY/RP and RUN/IOX alphanumeric
Tip
messages.
Table 9
reloaded.
Table 9
LED Display
INIT/NV
02A8/HW
OK/RIO
OK/CPU
SENT/RPT
INIT/MEM
TEST/MEM
LNCH/RMON
RDY/RP
or
PWRD
OL-17436-01
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
displays the LED alphanumeric messages on a standby PRP-3, if the current active PRP-3 is
Dual PRP-3 Scenario
Description or Console Message
Displays the LED message during the initialization of the NVRAM infra code.
LED message displayed immediately after the board is powered on.
Displays "1.330GHz dual-core MPC8641D Rev 2.1, 532MHz MPXclk".
Displays "Discovering memory in slot DIMM1 ......................... Found 2GB
DIMM
Discovering memory in slot DIMM2 ......................... Found 2GB DIMM"
Displays "Testing low memory ....................................... OK
Loading main ROMMON image ................................ OK
Verifying loaded image ................................... OK
Load succeeded; launching target ......................... OK"
Displays "Cisco ROMMON System Bootstrap, Version 0.16.0 (bld1)
DEVELOPMENT SOFTWARE
Compiled on 08/27/08 at 15:04:49 PDT [BLD-rommon]
Copyright (c) 1994-2008 by Cisco Systems, Inc.
MPC8641D platform with 4 GB of main memory"
DISPLAYS "Loading disk0:c12k-os-mbi-3.8.0.15I/mbiprp-rp.vm (14809672
bytes)... !!!"
Tip Instead of RDY/RP, sometimes PWRD is displayed in the normal
booting process.
Checking the Installation
27