With all the important functions of multi-view processor
Support high-quality waveform, vector monitoring
Support HDMI output or HD-SD display, can achieve the cascade and copy output of
devices
MARKER, Time Code, MET display
Pre-set the color temperature, user-adjustable color temperature
Chapter 2 Unpackaging and installation
Opening the box, please check whether the device has been damaged during transport. Check all
the things listed is received: the host, a base, a 19V adapter and power cord, 1 base board with
screws, the base installation instruction, the user manual and warranty card. If there is any missing,
contact your distributors or Beijing Osee Digital Technology Ltd. for it.
We recommend that you should save the packing materials for future needs.
1. Install the base.
2. Put the MVM230 on the position you need for installing, and connect the power. Please
make sure the place you put is safety.
3. Connect a standard signal lines to the corresponding input port. All BNC connector
impedance must be 75Ω.
4. Use the power adapter and cord to connect single-phase three-wire AC power or following
the local power supply conditions. Make sure the power cord grounding well.
5. Finally, turn on the power switch, so that the device will be ready for work.
MVM230 Quad Split LCD Monitor
Installation
2
User Manual