Table of Contents
Advertisement
Chapter 2 Unpacking and Installation
Unpack the LMW-230 Monitor and inspect for any apparent physical damage that may have occurred in
transit. In addition to the monitor, the packaging should contain a power cord, warranty card, a power
adapter (AC to DC) and table stand. There are also seven M4 x 8mm screws for table stand attaching.
We recommend you retain the shipping carton for future use.
1. When installing the table stand, please assure a soft and non-scratch surfaced is used to place the
monitor on.
2. Place the monitor on the soft surface screen face down for installation of table stand.
3. Use the included screws to attach the table stand.
The table stand attaches on the rear bottom of the nonitor. Please refer to Chapter 3 for further
reference.
4. Place the LMW-230 in the required location for operation.
5. Connect the required signals. For BNC connections use 75Ω rated connectors.
6. Connect A.C. Mains power using the included EIC power cord. Please ensure an Earth ground
present to ensure proper operation of the unit.
7. As a final step turn on the mains power using the toggle switch located on the rear of the LMW-230
above the power connection.
LMW-230 SERIES LCD MONITOR
Attaching the table stand
- 2 -
User Manual
Advertisement
Table of Contents
