Table of Contents
Advertisement
Chapter 3 Unpacking and Installation
1.
Unpack the RMS5733 Monitor and inspect for any apparent physical damage that
may have occurred in transit. We recommend you retain the shipping carton for future use.
If there be any damage, immediately contact OSEE DIGITAL TECHNOLOGY LTD at
+86-010-62968823.
2.
After inspection, install in your desired location of a standard EIA 19-inch equipment
rack. Adequate ventilation is required when installed to prevent possible damage to the
RMS5733 internal components.
3.
Connect required cables for signal input and output. Please note that power must be
applied to the RMS5733 for all outputs to be activated. For BNC connections use 75
rated connectors.
4.
Connect A.C. Mains power using the included power cord. Please ensure an Earth
ground present to ensure proper operation of the unit. Fasten the power protect accessory.
5.
As a final step turn on each screen of the RMS5733 by depressing the power switch
located on the front of the unit.
Supplied Accessories:
1.Monitor
2.12 V DC power supply
3.User Manual
4.Warranty Card
—4—
RMS5733 LCD MONITOR
1
1
1
1
User Manual
Advertisement
Table of Contents
