6.0 Operation
Never place hands in the clamp and knife area. Use the push-out key
or the backgauge glide control to move the paper to an area where it can be reached.
6.11.8 CLEAR Key
The CLEAR key is used to clear error messages or the current entry line.
6.11.9 ENTER Key
The ENTER keys select options and stores typed data.
6.11.10 Priority Add (X/Y) Key
The Priority Add key is used for entering fractions when they are combined with whole numbers. The
symbol displayed when this key is pressed is the underline symbol "_". An example of a number
entered using the Priority Add key is 1_1/2.
6.11.11 Arrow Keys
The four arrow keys can be used in almost all screens. The arrow keys are primarily used for moving
the cursor around on the screen, or to toggle between highlighted selections. In some screens, the
left arrow key acts as a backspace key.
6.11.12 PAGE Keys
The PAGE keys are used with lists. Pressing a PAGE key when a job is open moves the cut location
eighteen cuts. If the cut location is beyond the first or last cut, the PAGE keys move to the first cut
(PAGE Up) or to the last cut (PAGE Down). Pressing a PAGE key when a list of jobs is displayed will
move ten lines to display more of the list.
27