Base Memory - IWILL DVD266u-RN Manual

Chapter 4
Video
EGA/VGA
(Default Value)
CGA 40
CGA 80
MONO
Halt On
All Errors
(Default Value)
No Errors
All, But Keyboard
All, But Diskette
All, But Disk/Key

Base Memory

T he POST (Power-On Self Test) determines the amount of base
(conventional) me mory installed in the system. T he value of the
base memory is typically 640K. T his field has no options.
Extended Memory
T he BIOS determines how much extended memory is present
during the POST. T his is the amount of memory located above
1MB in the processor' s memory address map. T his field has no
options.
Total Memory
Displays the total memory available in the system
Specifies EGA or VGA adapterd
Specifies CGA adapter with 40 column mode
Specifies CGA adapter with 80 column mode
Specifies Monochrome adapter
Each time the BIOS detects a non-fatal error,
the system will stop and display an error
message
The system will stop for any errors that are
detected
The system will stop for any errors except
keyboard error
The system will stop for any errors except
diskette error
The system will stop for any errors except
diskette and key board errors
29
BIOS Setup