Base Memory; Extended Memory; Total Memory; Advanced Bios Features - IWILL dca200 Manual

Chapter 5 BIOS Setup
Options
EGA/VGA (*)
CGA 40
CGA 80
MONO
5.3.7 Halt On
This field determines how the system reacts to errors once detected.
Options
All Errors (*)
No Errors
All, But Keyboard
All, But Diskette
All, But Disk/Key

5.3.8 Base Memory

The amount of base (conventional) memory installed in the system.
value of the base memory is typically 640K. This field has no options.

5.3.9 Extended Memory

This is the amount of memory located above 1MB in the processor's memory address
map. This field has no options.

5.3.10 Total Memory

Displays the total memory available in the system

5.4 Advanced BIOS Features

DCA200-N Series
Description
Specifies EGA or VGA adapter
Specifies CGA adapter with 40 column mode
Specifies CGA adapter with 80 column mode
Specifies Monochrome adapter
Description
Each time the BIOS detects a non-fatal error, the
system will stop and display an error message
The system will not stop for any errors that are
detected
The system will stop for any errors except keyboard
error
The system will stop for any errors except diskette
error
The system will stop for any errors except diskette
and keyboard errors
57
T h e