Using The Gateway Dhcp Static Lease Option - Ubee DDW262.G User Manual

Ubee Interactive
5.4

Using the Gateway DHCP Static Lease Option

The Static Lease option allows you to assign static IP addresses to clients on your
network using the IP addresses acquired through the DHCP server on the cable
modem.The IP address must be part of the active DHCP IP pool configured on this
device.
Steps
To assign static IP addresses:
1. Access the Web interface.
2. Click the Gateway link from the top of the screen.
3. Click Static Lease from the left side of the screen. The Static Lease fields are
Ubee DDW262.G Wireless Cable Modem and Router Subscriber User Guide • September 2011
Label
Apply
DHCP Clients
Force Available
Description
Click Apply to save all changes.
Lists all DHCP clients currently connected to the cable
modem, either via Ethernet link, or via wireless connection.
Each client is also listed with the following information:

MAC Address / IP Address / Subnet Mask

Duration displays the accumulated time since the client
acquired the IP address.

Expires is the time until the IP lease time ends and must
be recycled. If the IP address is reserved to a certain host,
it shows "STATIC IP ADDRESS."

Select reserves the current private IP address to be
assigned to this host statically when the radio button is
selected.
Activates a selected rule in the DHCP Clients List, and assigns
the displayed private IP address statically to the connected
network client. The Select button must be selected.
Using the Gateway DHCP Static Lease Option
33