Ubee DDW262.G User Manual page 36

Using the Gateway DHCP Option
this screen example.
32
Label
DHCP Server
Private Starting Address
Number of CPEs
Public Starting Address
Number of CPEs
Lease Time
Ubee DDW262.G Wireless Cable Modem and Router Subscriber User Guide • September 2011
Description
Enables (Yes) or disables (No) the DHCP server on the
device. If No is selected, all the static DHCP rules in this
screen are ignored.
Defines the starting address for the pool of private IP
addresses that may be used by connecting clients. Private
addresses are translated to public IPs in order to be used on
the network.
Defines the maximum number of Customer Premises
Equipment (CPE) that can connect to the network, via the
cable modem using private IP addresses. This number
determines the end of the private IP address range started
above.
Defines the starting public IP address. Public addresses can
be recognized on the network.
Defines the maximum number of Customer Premises
equipment (CPE) that can connect to the network, via the
cable modem. This number determines the end of the public
IP address range started above.
Defines the time in minutes between 1 and 71582788 for the
DHCP lease time duration. A DHCP user's PC gets an IP
address with a lease time. When the lease time expires, the
PC must connect to the DHCP server and be reissued
another, unused IP address.
Ubee Interactive