Using The Gateway Setup Option - Ubee DDW262.G User Manual

Ubee Interactive
5.2

Using the Gateway Setup Option

The Setup option allows you to configure the network settings of the device.
Steps
To configure gateway settings:
1. Access the Web interface.
2. Click the Gateway link from the top of the screen.
3. Click Setup from the left side of the screen. The Setup fields are explained following
Ubee DDW262.G Wireless Cable Modem and Router Subscriber User Guide • September 2011
Label
DHCP Server
NAT
Wireless Status
Operating Mode
Private IP Range
Public IP DHCP Server
Range
Public IP Total Range
System Up-Time
Description
Displays the status of the DHCP server feature
(Enabled/Disabled).
Displays the status of the NAT feature (Enabled/Disabled).
Displays the status of the wireless feature (Enabled/Disabled).
Displays what mode the router is working in (Bridge, Gateway,
NAT, Router, or NAT Router). Note: Firewall menu options are
not available when the device is in Bridge mode. Firewall
options are available only when the device is in NAT,
NATRoute, or Route modes.
Displays the private IP address assigned to DHCP client.
Displays the Public IP DHCP Server Range.
Displays the Public IP total range.
Displays the accumulated time since the last power cycle.
Using the Gateway Setup Option
29