Gateway - Setup - Ubee DDW3612 User Manual

Ubee Interactive
3.7.2
The Setup option allows you to make basic configurations to the device.
1. Access the web interface. Refer to
2. Click the Gateway link from the top of the screen.
3. Click Setup from the left side of the screen. The Setup fields are explained
following this screen example.
Label
DDW3612 Subscriber User Guide • July, 2010

Gateway - Setup

LAN IP Address
LAN MAC Address
WAN IP Address
WAN MAC Address
Duration
Expires
Release WAN Lease
Renew WAN Lease
Refresh
page 7, if needed.
Description
Defines the local IP address, which will be the default
gateway address for all wired LAN hosts that connect to
the DDW3612 Wireless Cable Modem Gateway.
Displays the LAN interface's hardware address.
Displays the current WAN public IP address that is
obtained from the service provider.
Displays the WAN interface's hardware address.
Displays the accumulated time since successfully acquiring
a WAN public IP address.
Displays the remaining time before the expiration of the
WAN IP address, if applicable.
Click to release the WAN public IP address.
Click to renew the WAN IP address.
Click to refresh the status of this page.
3.7 Gateway
21