Forwarding Calls On Trunks - Siemens HiPath 500 User Manual

Step by Step
Forward MULAP on
1=all calls
2=external calls only
3=internal calls only
Save
Making calls in the team/executive/secretary configuration

Forwarding calls on trunks

You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system).
Activating call forwarding for one trunk activates the
function for all trunk keys assigned to this trunk in your
group.
N
Open the Program/Service menu
Select and confirm the option shown.
or
S
If available, press the "CFW MULAP" key.
(You have programmed a key with the incomplete "CFW
MULAP" function, excluding the call forwarding type
and destination
S
Press the required line key.
or
j
Enter the required trunk number.
Select and confirm the option shown.
or
select and confirm the option shown
or
select and confirm the option shown.
j
Enter the destination number.
Confirm.
or
S
If available, press the "CFW MULAP" key. (You have
stored the call forwarding type and destination on the
"CFW MULAP" key,
page 22.
page 63.)
page 63.)
99