Using Functions In Isdn Via Code Dialing (Keypad Dialing) - Siemens HiPath 500 User Manual

More functions/services
Step by Step
*503=Keypad dialing?
88
j
Wait for the dial tone and enter the code for example,
97 for Do not disturb on. If necessary, make further
*
entries; refer also to the user guide for dial pulse/DTMF
phones.
or
j
Dial the external number.
You can only perform one function/establish one
outgoing connection at a time.
The connection is cleared as soon as the function
is successfully activated.
In the case of an external call, the connection is
cleared as soon as one of the call partners hangs
up.
Using functions in ISDN via code
dialing (keypad dialing)
If authorized (contact your service personnel), you can
access ISDN functions in some regions using codes.
N
Press the key shown.
Confirm.
j
Enter the required trunk number (contact your service
personnel).
j
Entering a code for required ISDN function (contact your
service personnel).
Contact your network provider to find out which
ISDN functions can be code-operated in your
country.
Siemens Enterprise Communications
GmbH & Co. KG shall not be liable for damages/
costs which may be incurred by fraudulent activ-
ities or remote operation (such as toll fraud).